FAQs • Carlisle, MA • CivicEngage

How does Inspectional Services know if the structure was placed in the location proposed?: For all new houses and for additions which are close to the required setbacks a certified "as-built" plot plan must be submitted to Inspectional Services after completion of the foundation. Framing can not proceed until the plot plan has been submitted.

▼
Building Department - Plot Plans

1. Is a plot plan required?: If the work involves a new structure or an addition to an existing structure, a plot plan is required.

2. I have a mortgage plan that was given to me by the bank when I purchased my home. Can this be used?: The purpose of a plot plan is for determination of compliance with dimensional controls of the Zoning By-Law. A mortgage plan is only a rough approximation of where the house is located, and was prepared only for mortgage purposes. Due to the inaccuracy of these plans, they can only be used if the project is far in excess of the required setbacks (generally, at least 5 feet in excess of the required setback). If the plan shows that your project will be close to the required setbacks, a more accurate plan will be required.

3. Can I prepare my own plot plan, if I am certain where my property line is?: No. Plot plans can only be prepared by a Registered Land Surveyor, and must bear his/her stamp.

4. If I don't have a plot plan, where can I get one?: Mortgage plans can sometimes be obtained from the bank. Also, Inspectional Services has plans on file for many properties in town. If available, these may be acceptable. Otherwise, you must contact a Registered Land Surveyor to prepare a plan for you.

5. How does Inspectional Services know if the structure was placed in the location proposed?: For all new houses and for additions which are close to the required setbacks a certified "as-built" plot plan must be submitted to Inspectional Services after completion of the foundation. Framing can not proceed until the plot plan has been submitted.